Pilotage des usinages tridimensionnels - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2014

Stearing of three-dimensional machinings

Pilotage des usinages tridimensionnels

Résumé

In most mechanical manufacturing companies, setting machine-tools is a task delegated to the setter who seeks to ensure tolerances. This has the consequence of increasing the adjustment time with a quality that is not at the desired level. Over the past six years, the SYMME laboratory has developed steering methods (Copilot -Pro ® and inertial steering) to solve the problem of setting machine tools. Based on these methods, the works presented make a synthesis and presents new advances in steering of digital controls (CNC) to obtain the best quality regardless of the complexity of the part. The contribution of this workis presented in five chapters. The first chapter presents the general context of the research and makes a state of the art of existing works, on the one hand on the steering and on the other hand on the conformity. The steering consists in reducing the variability around the target products and the conformity consists in verifyingthat the dispersion of a characteristic is inside its tolerance interval. The second chapter discusses the methods of steering which consist in establishing the relationship between the characteristics of the workpiece and thetool-offsets and propose solutions to improve the calculation of the correction taking into account both tolerances and number of points probed on the surfaces of the workpiece. The third chapter presents the steering strategies and highlights the limitations of conventional methods for detecting out of control situations which are the Shewhart's control card and the T² Hotelling’s card. The fourth chapter is a synthesis of methodologies to facilitate the deployment of the methods in the industry. The fifth chapter presents an experimental application of inertial steering and a debriefing on the matrix steering used in a watch manufacturer company. Conclusion reiterates the main contributions of this work
Dans la plupart des entreprises de fabrication mécanique, le réglage des machines-outils est une tâche déléguée au régleur qui cherche à garantir les tolérances. Cela a pour conséquence d’augmenter le temps de réglage pour une qualité qui n’est pas au niveau souhaité. Au cours de ces six dernières années, le laboratoire SYMME a élaboré des méthodes de pilotage (Copilot-Pro®et Pilotage inertiel) pour résoudre le problème de réglage des machines-outils. Fondés sur ces deux méthodes, les travaux présentés en font une synthèse et présentent des nouvelles avancées dans le pilotage de commande numériques afin d’obtenir la meilleure qualité possible quelle que soit la complexité de la pièce. L’apport de ce travail est présenté en cinq chapitres. Le premier chapitre présente le contexte général des travaux de recherche et fait un état de l'art des travaux existants, d’une part sur le pilotage et d’autre part sur la conformité. Le pilotage consiste à réduire la variabilité autour de la cible des produits et la conformité consiste à s'assurer que la dispersion d'une caractéristique est contenue dans l'intervalle de tolérance de celle-ci. Le second chapitre revient sur les méthodes de pilotage qui consistent à établir les relations entre les caractéristiques de la pièce et les correcteurs et propose dessolutions pour améliorer le calcul de la correction en tenant compte à la fois des tolérances et des nombres de points palpés sur les surfaces de la pièce. Le troisième chapitre présente les stratégies de pilotage et met en évidence les limites des méthodes classiques de détection des situations hors contrôle qui sont la carte de contrôle de Shewhart et la carte T² de Hotelling. Le quatrième chapitre fait une synthèse des méthodologies pour faciliter le déploiement des méthodes dans l’industrie. Le cinquième chapitre présente une application expérimentale du pilotage inertiel et un témoignage de l'utilisation du pilotage matriciel dans une entreprise d'horlogerie. Une conclusion rappelle les principaux apports de ce travail.
Fichier principal
Vignette du fichier
38767_ABDELHAKIM_2014_archivage.pdf (2.46 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-00937826 , version 1 (28-01-2014)
tel-00937826 , version 2 (17-02-2014)

Identifiants

  • HAL Id : tel-00937826 , version 2

Citer

Boukar Abdelhakim. Pilotage des usinages tridimensionnels. Autre. Université de Grenoble, 2014. Français. ⟨NNT : 2014GRENA002⟩. ⟨tel-00937826v2⟩
591 Consultations
1561 Téléchargements

Partager

Gmail Facebook X LinkedIn More