Advanced virtual simulation for optimal cutting parameters control in five axis milling - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2014

Advanced virtual simulation for optimal cutting parameters control in five axis milling

Simulation virtuelle avancée pour contrôler le paramètre de coupe optimale en fraisage cinq-axes

? Hendriko
  • Fonction : Auteur

Résumé

This study presents a simple method to define the Cutter Workpiece Engagement (CWE) during sculptured surface machining in five-axis milling. The instantaneous CWE was defined by determining two engagement points, lowermost engagement (LE)-point and uppermost engagement (UE)-point. LE-point was calculated using a method called grazing method. Meanwhile the UE-point was calculated using a combination of discretization and analytical method. During rough milling and semi-finish milling, the workpiece surface was represented by vertical vector. The method called Toroidal–boundary was employed to obtain the UE-point when it was located on cutting tool at toroidal side. On the other hand, the method called Cylindrical-boundary was used to calculate the UE-point for flat-end cutter and cylindrical side of toroidal cutter. For a free-form workpiece surface, a hybrid method, which is a combination of analytical method and discrete method, was used. All the CWE models proposed in this study were verified and the results proved that the proposed method were accurate. The efficiency of the proposed model in generating CWE was also compared with Z-mapping method. The result confirmed that the proposed model was more efficient in term of computational time. The CWE model was also applied for supporting the method to predict cutting forces. The test results showed that the predicted cutting force has a good agreement with the cutting force generated from the experimental work.
La thèse concerne l’usinage à 5 axes de formes complexes. Le but est d’estimer le plus précisément possible les efforts induits par la coupe pour ajuster la vitesse d’avance et gagner en performance. Pour cela, il est nécessaire d’estimer les engagements radial et axial de la fraise à chaque instant. Ce calcul est rendu particulièrement complexe à cause de la forme de la pièce, de la forme du brut et de la complexité de la géométrie de l’outil. Les méthodes usuelles par Zbuffer sont particulièrement couteuses en temps de calcul. Dans ces travaux nous proposons une méthode de calcul rapide à partir d’une modélisation du contact dans toutes les situations envisageables. Différentes simulations et expérimentations ont permis de valider la précision expérimentalement.
Fichier principal
Vignette du fichier
HENDRIKO_2014CLF22464.pdf (7.35 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01176218 , version 1 (15-07-2015)

Identifiants

  • HAL Id : tel-01176218 , version 1

Citer

? Hendriko. Advanced virtual simulation for optimal cutting parameters control in five axis milling. Other [cond-mat.other]. Université Blaise Pascal - Clermont-Ferrand II, 2014. English. ⟨NNT : 2014CLF22464⟩. ⟨tel-01176218⟩
202 Consultations
483 Téléchargements

Partager

Gmail Facebook X LinkedIn More